The compressed garbage truck can pull the garbage in the underground garbage container and the garbage container to the truck together for unloading at the same time, which reduces the labor intensity of the workers. The collection and transportation method is currently the most widely used garbage collection and transportation method in the world. It can realize more than one car per car, which greatly reduces the cost and space of the equipment. The functions of the special devices are all powered by the automobile engine, and are manually or electrically controlled by the hydraulic mechanism. The box body of the vehicle adopts a fully sealed welded structure of high quality carbon steel plate, which has the advantages of high strength, light weight, and no secondary pollution.

Compression type garbage truck is a special vehicle used for the collection, transportation, and unloading of bagged and bulk domestic garbage in cities and towns.

The car is composed of chassis, main arm cylinder, attached frame, flip frame, support legs (optional), locking frame, locking cylinder and multi-way directional valve. One end of the flip frame is connected to the attached frame, and the other end is provided with a movable pull arm, and a locking system is installed in the middle; one end of the movable arm cylinder is connected to the movable arm, and the other end is connected to the attached frame; the locking mechanism passes the lock The action of tightening the oil cylinder can connect the box on the attached frame with the turning frame and the pull arm as a whole when the box is unloaded, forming a self-unloading angle when the main oil cylinder is extended, or it can be reversed by retracting the locking oil cylinder The frame and the attached frame are locked together, and the retractable or extended main cylinder is used to move the underground garbage bin to the attached frame or return to the ground from the attached frame.

Before loading the garbage, when the no-load operation reaches 6 standard air pressure, hang the power take-off (bottom left of the steering wheel in the cab), check the components for leaks or abnormalities, and then operate according to the position indicated by the operation sign; The steps are as follows:

Step 1. Push the locking hook operation handle to the retracted position, retract the locking cylinder, retract the locking frame and lock the flip frame with the attached frame;

Step 2. Pull the arm operation handle to the extended position, the arm oil cylinder extends, the movable arm rotates around the front hinge axis of the flip frame, the arm is in the hook box position, and the height of the arm hook is adjusted appropriately with the box body. Hook alignment

Step 3. When the arm hook is hooked to the box hook, continue to push the lower arm operation handle to the drop position, so that the garbage box continues to get on the car (Note: ensure that the longitudinal beam of the garbage box is located at the rear of the attached frame with two rear rollers between);

Step 4. After the trash box is dropped on the attached frame, loosen the handle operation handle to return it to the neutral position, and then pull up the lock hook operation handle to the locked position, and the lock cylinder will extend so that Turn up the lock frame and lock the flip frame with the trash box, loosen the handle to return it to the neutral position;

 Step 5. Before unloading the garbage, hang the power take-off when the vehicle has reached 6 standard air pressure, open the rear door lock device of the waste bin, and at the front two-way multi-way valve, first determine the lock frame to lock the waste bin. Body (pulling the locking hook operation handle to the locked position), and then pulling the pulling arm operation handle to the extended position, the garbage bin body is tilted to lift the garbage for unloading.