Some driver masters use a dump garbage truck to raise the car body, and then operate the down button to drop the car body very slowly, and the car body directly rises to the top when the accelerator is pressed. At this time, he thought it was the falling of the car body, and hurriedly called the dump truck manufacturer for inspection. As a result, the maintenance personnel told it that the power take-off of the dump truck body was not due to a failure. As a result, it was found that the operation was really caused by the operation problem, so everyone must operate the dump truck properly when operating it.

Dump type garbage truck can tilt the carriage to a certain angle, and then dump the garbage truck inside the cargo compartment by itself. The operation of the dump truck is very simple, but it must be properly operated according to the operation or use, otherwise the driver will be considered to be faulty like the driver below.

There are also some operating precautions for the reference of driver masters:

1. If abnormal movement is found during the operation of the hydraulic system, stop working immediately, analyze the cause, and troubleshoot. Never apply pressure.

2. The clutch pedal must be depressed whether the power take-off or the power take-off is disengaged. When the power take-off and the multi-way valve are in operation, the garbage truck must not enter the driving state.

3. The pressure regulating device of the hydraulic system is a pressure regulating bolt on the multi-way reversing valve. After the bolt is adjusted and locked, it must not be moved randomly during use. The user allows the oil pressure to be adjusted at will.

4. When the car is loaded, it is not allowed to land quickly. It should be controlled by operating the directional valve to slow down.

5. When lifting the picture box due to oil change, cleaning, and maintenance, you must support the car case brace to prevent the car case from falling suddenly and causing accidents.

6. When lifting the box and unloading, choose a flat and solid ground for parking and dumping. The car box should be slowly raised with the discharge of the material to prevent the vehicle from tipping over or the head of the car being lifted.

7. Do not flush water into the hydraulic oil tank when washing the car. Always check the height of the hydraulic oil level. Fill in time when the hydraulic oil is insufficient. All oil circuit joints must not leak oil.

8. Prevent collision during maintenance, and avoid damage, deformation and scratches on assembly parts.